https://boda.su/en/posts/id896-how-to-fix-a-broken-faucet-without-replacing-it
How to Fix a Broken Faucet Without Replacing It
Simple DIY Method to Repair a Single-Lever Faucet
How to Fix a Broken Faucet Without Replacing It
Learn how to repair a single-lever faucet at home using simple tools, vinegar, and silicone grease. Save money and restore smooth operation without replacement.
2025-10-23T15:31:03+03:00
2025-10-23T15:31:03+03:00
2025-10-23T15:31:03+03:00
The Hidden Flaw of Modern Faucets
Today’s single-lever faucets often break in ways that make simple gasket replacement impossible. Their design leaves no room for detachable parts, turning even minor repairs into costly replacements. Yet, skilled DIY enthusiasts have discovered a way to restore a faucet’s function without buying a new one.
What You’ll Need
Prepare the following tools and materials:
Flat and Phillips screwdrivers
Hex key or compatible driver for fasteners
Adjustable wrench
Small container for cleaning parts
Table vinegar or citric acid
Clean water
Silicone grease
Step-by-Step Guide
1. Turn off the water
Before taking the faucet apart, shut off the water supply — either the main valve or the one for that specific line.
2. Remove the handle
Start by taking out the small plastic cap, then loosen the fixing screw with a hex key. Detach the handle along with its housing.
3. Dismantle the inside
The faucet’s core contains several plastic components secured by clips. Remove the three elastic seals and separate the body into individual parts.
4. Clean off mineral deposits
Soak the components in a mixture of water and vinegar (or citric acid). After a few hours, mineral and salt buildup will dissolve. Rinse the cleaned parts thoroughly with water.
5. Lubricate and reassemble
Put everything back together using silicone grease on the internal surfaces. This helps restore smooth lever motion and ensures watertight connections.
6. Reinstall and test
Mount the faucet back in place, tighten the fasteners, and reopen the water supply. Check its operation — the faucet should work smoothly again, with no leaks or stiffness.
Why This Works
This DIY approach saves money and gives an old faucet a second life. Careful disassembly and thorough cleaning are key to success. Silicone grease not only prevents jamming but also extends the life of the seals.
A simple, time-tested trick: with occasional maintenance every few years, your faucet can keep working flawlessly for many more.
Faucet Repair, DIY Faucet Fix, Single-Lever Mixer, Bathroom Maintenance, Kitchen Faucet, Home Plumbing, Silicone Grease, Vinegar Cleaning, Cost Saving
2025
articles
Simple DIY Method to Repair a Single-Lever Faucet
Learn how to repair a single-lever faucet at home using simple tools, vinegar, and silicone grease. Save money and restore smooth operation without replacement.
Generated by Dall-e
The Hidden Flaw of Modern Faucets
Today’s single-lever faucets often break in ways that make simple gasket replacement impossible. Their design leaves no room for detachable parts, turning even minor repairs into costly replacements. Yet, skilled DIY enthusiasts have discovered a way to restore a faucet’s function without buying a new one.
What You’ll Need
Prepare the following tools and materials:
- Flat and Phillips screwdrivers
- Hex key or compatible driver for fasteners
- Adjustable wrench
- Small container for cleaning parts
- Table vinegar or citric acid
- Clean water
- Silicone grease
Step-by-Step Guide
1. Turn off the water
Before taking the faucet apart, shut off the water supply — either the main valve or the one for that specific line.
2. Remove the handle
Start by taking out the small plastic cap, then loosen the fixing screw with a hex key. Detach the handle along with its housing.
3. Dismantle the inside
The faucet’s core contains several plastic components secured by clips. Remove the three elastic seals and separate the body into individual parts.
4. Clean off mineral deposits
Soak the components in a mixture of water and vinegar (or citric acid). After a few hours, mineral and salt buildup will dissolve. Rinse the cleaned parts thoroughly with water.
5. Lubricate and reassemble
Put everything back together using silicone grease on the internal surfaces. This helps restore smooth lever motion and ensures watertight connections.
6. Reinstall and test
Mount the faucet back in place, tighten the fasteners, and reopen the water supply. Check its operation — the faucet should work smoothly again, with no leaks or stiffness.
Why This Works
This DIY approach saves money and gives an old faucet a second life. Careful disassembly and thorough cleaning are key to success. Silicone grease not only prevents jamming but also extends the life of the seals.
A simple, time-tested trick: with occasional maintenance every few years, your faucet can keep working flawlessly for many more.
